PCBs.io ships via ePacket (full tracking) from the US to eligible countries on orders exceeding $15.

Shared boards by: 42_red_herrings

Search shared boards:
serplus batshield rev3

serplus batshield rev3

Created by 42_red_herrings on 2018-01-28 10:03:40

2 Layer Board - 0.8848 sq in (1.2550in x 0.7050in) / 570.84 sq/mm (31.88mm x 17.91mm)
$3.54 per set of 4 ($4.00 per sq in)

A shield for the bat board (pcb) to turn into an F072-based SerPlus.

firmware design_files

License: CC-BY 4.0
Project URL: https://flabbergast.github.io/posts/serplus-shield
Tags: bat-board

1 person has said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

pocketbeagle RFM69 cape

pocketbeagle RFM69 cape

Created by 42_red_herrings on 2018-01-28 09:38:36

2 Layer Board - 1.8140 sq in (1.0050in x 1.8050in) / 1170.32 sq/mm (25.53mm x 45.85mm)
$7.17 per set of 4 ($3.95 per sq in)

A half-mounted Pocket Beagle cape with RFM69 radio, atmega328p, RTC,
atsha204, a few status LEDs, and a JST connector for Pocket Beagle backup
power.

License: CC-BY 4.0
Project URL: https://flabbergast.drak.xyz/posts/pb-rfmcape/
Tags: pocketbeagle, rfm69

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

bat-board-rev3

bat-board-rev3

Created by 42_red_herrings on 2017-11-20 11:28:14

2 Layer Board - 0.9924 sq in (1.4059in x 0.7059in) / 640.26 sq/mm (35.71mm x 17.93mm)
$3.97 per set of 4 ($4.00 per sq in)

A teensy-sized breakout board for QFP-48 STM32 MCUs. Should work with any pinout-compatible MCUs. Tested with STM32L052C8T6, STM32F072CBT6, STM32F103C8T6, but most of LQFP-48 packaged STM32s should work.

Intended for low-power applications (e.g. sensors), or USB applications.

License: CC-BY 4.0
Project URL: https://flabbergast.github.io/bat-board
Tags: stm32, stm32f0, stm32l0, stm32f072, stm32l052

1 person has said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

f030 breakout

f030 breakout

Created by 42_red_herrings on 2017-10-03 20:05:12

2 Layer Board - 0.6944 sq in (0.6200in x 1.1200in) / 448 sq/mm (15.75mm x 28.45mm)
$2.78 per set of 4 ($4.00 per sq in)

A small breakout board for STM32F030F4P6 MCU. One LED, reset button, bootloader button, all pins broken out.

License: CC-BY 4.0
Project URL: https://www.tindie.com/products/42_red_herrings/stm32f030f4p6-breakout
Tags: stm32, stm32f0, stm32f030

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.