PCBs.io now accepts Bitcoin!

MySGrowLED
Board Name:
Dimensions:
Price:
Total Cost:

Created by emc2cube on 2017-01-31 05:10:38

Description: MySensors module designed for wireless greenhouse automation (nRF24L01, 2.4GHz).

This module allow you to:

  • control a primary LED light (5-40V input can be used to power the module)
  • control a secondary circuit designed for a CPU PWM fan but can be used for a second light, humidifier, relay or anything else using 12V
  • monitor temperature using an optional onboard DS18b20 sensor
  • monitor external temperature by plugging external OneWire sensors
  • monitor any additional parameters using additional I2C modules such as temperature, humidity, light levels, barometric pressure, etc...

License: CC-BY 4.0
Project URL: https://github.com/emc2cube/MySGrowLED
Board Revision: 1.0

Order Now

Board Images:

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

Board Outline

Board Outline

This shows the outline of your board, it will be cut to this shape.

Top Copper Layer

Top Copper Layer

This shows where the copper will remain after etching the top of the board.

Bottom Copper Layer

Bottom Copper Layer

This shows where the copper will remain after etching the bottom of the board. (mirrored)

Top Soldermask

Top Soldermask

This shows where soldermask will be applied on the top over the bare copper board.

Bottom Soldermask

Bottom Soldermask

This shows where soldermask will be applied on the bottom over the bare copper board. (mirrored)

Top Silkscreen

Top Silkscreen

This is the white print that will be printed on the top of the board.

Bottom Silkscreen

Bottom Silkscreen

This is the white print that will be printed on the bottom of the board. (mirrored)

Drill Holes

Drill Holes

This shows all the holes that will be drilled in your board.